True North Fabrications

A set of 3/16" steel plates to body mount chop your 03+ 4Runner! Designed for optimal tire clearance without having to fully relocate your body mount. Easily clear larger tires for…

Info to know before you order: THIS IS A WELDED BUMPER! This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted veh…

Info to know before you order Bolt on sliders with kickout for 3rd generation Tacomas. Round tubing is made out of 1.75" OD 11 gauge ERW. Square tubing is 2"x2" 11 gauge. Mounting…

Info to know before you order Weld on kit sliders with kickout for 3rd generation Tacomas. Round tubing is made out of 1.75" OD 11 gauge ERW. Square tubing is 2"x2" 11 gauge. Moun…

Info to know before you order: THIS IS A WELDED BUMPER! This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted veh…

Info to know before you order: THIS IS A WELDED BUMPER! This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted veh…

Need some extra rear-facing light? Want to be seen in dusty situations? This is the setup for you! Slides right into factory rail 3/16" Steel Powdercoated Black Laser cut &am…

Looking to add a winch to your rig but don't want the weight of a full bumper replacement? This hidden winch plate has you covered! Fitting neatly behind the stock bumper, this win…

A little about the product: 1/4" Steel Bolt-On Application Optional tie in point with our 4th gen hybrid front bumper Comes with new grade 8 hardware Lead time: 1-2 Weeks&nb…

Custom 3rd brake light cover that attaches to your spoiler and allows your brake light to display either Toyota or TRD when on. Must have a spoiler! Comes primed and ready for pai…

Info to know before you order: THIS IS A WELDED BUMPER! This is NOT A WINCH BUMPER. There is no room or mounting points for a winch inside the bumper. In order to ge…

Info to know before you order: The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallo…

Info to know before you order: THIS IS A WELDED BUMPER! In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You wil…

Info to know before you order: In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 inches off…

Info to know before you order: THIS IS A WELDED BUMPER! There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches c…

Info to know before you order Weld-on kit sliders with kick out for 3rd generation 4runners. Round tubing is made out of 1.75" OD 11 gauge ERW. Square tubing is 2"x2" 11 gaug…

Ditch light brackets for all 3rd gen 4runners (96-02) and 1st Gen Tacomas (96-04). These brackets will allow you to mount pod lights anywhere along the A-pillars. They are laser cu…

Info to know before you order: The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust…

Info to know before you order: THIS IS A WELDED BUMPER! This bumper was designed specifically for 3rd gen 4runners and 01-04 Tacomas. Tacoma owners installing this bumper will n…

Info to know before you order: The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust…